feed roller
英 [fiːd ˈrəʊlə(r)]
美 [fiːd ˈroʊlər]
进料滚；输纸辊
双语例句
- Worn clothing and feed roller bearings.
针布破损和给棉罗拉轴承坏。 - On the Study of the Design and Technic for the Cutting and Feed System on the CNC Lathe of Noncircular Cross Section Roller
异型轧辊数控车床切削进给系统的设计理论及其关键技术研究 - Adopting high-speed electric machinery for transmission, feed roller is synchronous with doffer transmission through computer control. Stepless speed changing is realized.
给棉罗拉采用高速电机传动，实现无级变速，通过计算机控制与道夫传动同步。 - Obstruction in the feed roller movement.
喂入罗拉装置运行阻塞。 - Extend paper feed, small pressure on pull roller, minimize cardboard deformation and ensure the cardboard quality.
延伸送纸，拉纸辊压力小，减小纸板变形，确保纸板质量。 - Materials enter the annular feed hopper and are conveyed to the roller at the head part by the conveying belt, thrown out and stacked on the ground;
物料进入环形进料斗经输送带传送至头部滚筒抛出，堆积地面； - Experimental Study on the Structural Parameter Optimization and Performance of the Combined Studded Feed Roller Seed Metering Device
钉轮组合式排种器结构参数优化及其排种性能试验研究 - The shaping principle of the theoretical camber of feed roller for superfinishing cylindrical rollers is analysed, and the method for determining the maximum diameter of feed roller and three formulas for feed roller shaping design are discussed in this paper.
分析了圆柱滚子超精加工用的导辊理论形状的形成原理，讨论了最大辊径的确定方法和三种导辊形状的设计公式以及适用范围。 - Through feed back signal in closed loop circuit, PLC controls speed of feed roller, and adjusts feed amount, so that iron ore layer can be controlled between high and low probes.
同时通过PLC闭环控制进料辊转速，调节进料量，控制料层保持在高低探针中间。 - Besides, According to the understanding of operational mechanism of the combined studded feed roller seed metering device, the author has formulated a mathematical equation to calculate the thickness of seed tugged by the studded feed roller and analyzed the factors to affect the thickness.
对钉轮组合式排种器工作机理进行研究，建立了计算钉轮组合式排种器的拖带层厚度的数学表达式，分析了影响拖带层厚度有关因素。 - In the study on the process test of tube power inner spinning, the radial feed, the angle of roller, reductions of wall thickness are taken as test factors.
在筒形件强力内旋压的工艺试验研究中，选取进给率、旋轮前角和变薄率作为试验因子，用正交试验法进行旋压试验。 - Improvement in feed roller of ftf-890 draw-texturing machine
FTF-800拉伸变形机喂入辊的改进 - Based on feed forward multi-layer artificial neural network, a new way to estimate the friction factor between roller and workpiece was studied.
基于多层前馈人工神经网络原理，研究了冷轧机组动态轧制过程中轧辊与轧件间摩擦因数的估算新方法。 - Exploration into Allocation of Feed Table and Feed Roller and Their Relation with Carding Function
梳棉机给棉板与给棉罗拉的配置及其对分梳作用关系的探讨 - This article states the merits and demerits of cotton comber mechanism in various kinds and its development trends from the feed mechanism, clamping and feeding mechanism, cylinder and top comb mechanism, driving mechanism of detaching roller and drafting mechanism.
本文从精梳机的喂入机构、钳持给棉机构、锡林与顶梳机构、分离罗拉传动机构及牵伸机构等方面阐述了各种棉精梳机机构的优缺点和发展趋势。 - This paper discusses the seeding measure effect on machine mechanical transplant in theory, and according to the seeding principle of feed roller and electromagnetic vibrating theory, a new device of flat seedling metering was designed.
从理论方面探讨了精密播种对机插质量的影响，采用外槽轮的播种原理和电磁振动相结合的排种理论，设计出一种新的毯状秧苗精密播种装置。 - This paper deals with the feed mechanism of ramie roller card and its effect in carding quality.
本文对苎麻罗拉梳麻机的喂给机构与梳理质量的关系进行了讨论。 - The Feed Position of NC Cutting of Groove of the Roller for Rolling Balls
斜轧球轧辊孔型的数控切削进刀位置 - Theory and Practice of Under Bagasse Feed Roller without Power Driving
压榨机无动力下送辘装置的理论与实践 - Optimum design of feed mechanism of roller mill
磨粉机喂料机构的优化设计 - Control Method Design for Feed Rate of Idle Roller in Cold Ring Rolling
环件冷辗扩芯辊进给速度规范设计 - Real-time feed rate of the radiating pipe and length is measured by the tachometer roller transmitted via a communication cable to a servo controller.
散热管的实时速度和长度由测速轮测量，并由通信电缆传输给伺服控制器。 - Under the combined effect of the feed movement of the roller and the rotary movement of the blank, the local plastic deformation gradually extends to the entire surface of billet until the desired shape is achieved, when the spinning process is completed.
在旋轮的进给运动和坯料的旋转运动共同作用下，使局部的塑性变形逐步地扩展到坯料的全部表面，直到达到要求形状，完成零件的旋压加工。